Generally you simply want so as to add a SSD. The Sabrent M.2 NVMe SSD to PCIe Gen5 x16 AIC is designed to just do that, add a M.2 SSD to a PCIe slot. We initially bought this adapter for a use that it virtually labored in, nevertheless it has been performing properly, so it’s time for a mini-review of this lower-cost $20 adapter with two very nice options that lower-cost adapters lack.
Notice: If you wish to verify present pricing or discover the unit, right here is an Amazon Affiliate link to what we bought.
Sabrent M.2 NVMe SSD to PCIe Gen5 x16 AIC Mini-Overview
Trying on the unit, it’s a quick PCIe x16 card with a heatsink for the mounted SSD. Being PCIe x16 implies that we are able to get a locking tab on the finish of the slot. It additionally makes it a bit more difficult to make use of in smaller slots as we’ll present later after we set up the cardboard.
On the again, we get our mounting holes for numerous M.2 lengths, however ours got here pre-fitted for a M.2 2280 (80mm) drive.
That is the button that unlatches the heatsink.
Right here is the highest.
Right here is the hinge aspect which faces in direction of the chassis I/O slot.
Here’s a view from the PCIe connector.
Urgent the latch button permits us to open the heatsink and we are able to see a very good sized thermal pad there.
Right here is the place the M.2 SSD goes and you’ll see the totally different mounting lengths. Notice, this solely goes to M.2 2280, not M.2 22110.
Right here we put in a Crucial T500 2TB PCIe Gen4 NVMe SSD. In hindsight, we in all probability ought to have purchased a Sabrent drive to place in there, however that is roughly a Rocket 4 Plus levle drive.
Right here is the M.2 latching mechanism. That is tool-less. You probably have ever used one of many $10 M.2 SSD adapters and needed to take care of screws, that is the simple model.
One thing this didn’t include is a full-height or low-profile bracket. As an alternative, the concept appears to be that you simply lock it right into a x16 slot.
Subsequent, allow us to get to our software to see the way it was very near what we wanted.
